C2070-984 IBM Case Manager V5.2 Solution Designer

Test information:
Number of questions: 61
Time allowed in minutes: 120
Required passing score: 57%
Languages: English

The test contains six sections, totaling 61 multiple-choice questions. The percentages after each section title reflect the approximate distribution of the total question set across the sections.

Section 1 - Planning and Architecture (16%)
Demonstrate understanding of IBM Case Manager Architecture
Identify solutions best addressed by Case Manager
Identify minimum installation requirements
Identify key differences between development and production environments
Identify integrated products and add-on software capabilities including licensing

Section 2 - Designing a Case Solution (44%)
Demonstrate an understanding of the Case Manager object model
Demonstrate an understanding of Case Builder and its Artifacts
Demonstrate an understanding of Case Task and Process Fragments
Demonstrate an understanding of the Page Designer
Demonstrate an understanding of IBM Content Navigator integration
Demonstrate an understanding of the security model
Demonstrate the use of IBM Case Manager bundled components
Demonstrate knowledge of using Case Operations Component

Section 3 - Deploying and Testing a Case Solution (8%)
Demonstrate an understanding of the deployment structure and its limitations
Demonstrate knowledge of project areas
Demonstrate knowledge of using the Case Manager Administration Client

Section 4 - Extending a Case Management Solution (16%)
Demonstrate knowledge of integrating custom widgets, business rules and reporting
Identify IBM capabilities to extend Case Manager capabilities
Identify integration scenarios between IBM BPM and Case Manager
Demonstrate an understanding of building a custom application using REST service and JavaScript APIs

Section 5 - Solution Migration (8%)
Understanding of the uses for Case Manager Configuration Manager, Case Manager Administration Client and FileNet Deployment Manager
Demonstrate an understanding of requirements and steps to deploy to production
Demonstrate an understanding of configuring security in a production environment

Section 6 - Business Metrics and Analytics (8%)
Demonstrate knowledge of using Case Analyzer
Demonstrate knowledge of using Case Monitor and Cognos RTM
Demonstrate knowledge of using Content Analytics with Enterprise Search

IBM Certified Solution Designer - Case Manager V5.2

Job Role Description / Target Audience
This certification test certifies that the successful candidate has the knowledge to create the theoretical and/or detailed technical design of an application, solution, and infrastructure using IBM Case Manager v5.2 (ICM). Provide expertise to evaluate and choose between alternatives; assist with balancing costs with capabilities and priorities. Identify products / technologies / processes to be included, and determine points of required integration and customization. Identify sizing and capacity issues, as well as conflicts with existing processes or environments.

Recommended Prerequisite Skills
Before preparing for this certification, the following knowledge and skills are recommended and assumed:

Knowledge of IBM Case Manager
Knowledge of P8 Administration
Knowledge of P8 Case Foundation
Knowledge of P8 Content Manager
Knowledge of supported Application Servers
Knowledge of Content Navigator
Knowledge of Cognos RealTime Monitoring
Knowledge of IBM Content Analytics

Click here to view complete Q&A of C2070-984 exam
Certkingdom Review

Best IBM C2070-984 Certification, IBM C2070-984 Training at certkingdom.com

C2070-585 IBM Datacap Taskmaster Capture V8.1 Implementation

Test information:
Number of questions: 63
Time allowed in minutes: 90
Required passing score: 60%
Languages: English


The test contains five sections totalling 63 multiple-choice questions. The percentages after each section title reflect the approximate distribution of the total question set across the sections.

Section 1 - Planning and Installation (11%)
Understand the deployment prerequisites and minimum installation requirements.
Identify Taskmaster components to be used.
Demonstrate knowledge of deployment validation procedures.

Section 2 - Configuration and Security (13%)
Demonstrate knowledge of client/server communication requirements.
Knowledge of the different authentication modes.
Demonstrate knowledge of Taskmaster Administrator.

Section 3 - Deployment and Testing (16%)
Understand how to test using Datacap Studio.
Understand how to set up scanning with Taskmaster.
Understand the steps needed to migrate an application.
Understand how to deploy and test Taskmaster components.

Section 4 - Customization (i.e. Studio) (46%)
Knowledge of the relationship between components in Studio (e.g. hierarchy, ruleset, library and profiles).
Demonstrate knowledge of the Taskmaster Workflow.
Understand Datacap Studio actions.
Demonstrate knowledge of various key Taskmaster variables (page statuses, ICP - IPS/DPS/DOF, SELECT, Lookup, Smart Parameters).
Understand Page Identification Techniques.
Understand index capturing techniques and recognition.
Understand how to build interfaces using DotEdit/DotScan.
Demonstrate knowledge of Export techniques.

Section 5 - Operations Management, Troubleshooting, and Administration (14%)
Understand how to enable / review logs to troubleshoot Taskmaster.
Understand how to leverage NENU.
Understand how to use Job Monitor/Station Monitor to monitor system.
Understand how to work with the RV2 reporting tool and create custom reports.

IBM Certified Deployment Professional - Datacap Taskmaster Capture V8.1

Job Role Description / Target Audience
This intermediate level certification test certifies that the successful candidate has the knowledge to create the theoretical and/or detailed technical design of an application, solution, and infrastructure using IBM Datacap Taskmaster Capture V8.1. Provide expertise to evaluate and choose between alternatives; assist with balancing costs with capabilities and priorities. Identify products / technologies / processes to be included, and determine points of required integration and customization. Identify sizing and capacity issues, as well as conflicts with existing processes or environments.

To attain the IBM Certified Deployment Professional - Datacap Taskmaster Capture V8.1 certification, candidates must pass 1 test. To gain additional knowledge and skills, and prepare for the tests based on the job roles and test objectives, click on the link for Test 000-585 below.

Recommended Prerequisite Skills
Before preparing for this certification, basic understanding of the following is recommended and assumed:

Working knowledge databases
Working knowledge of backend servers (API)
Working knowledge of LDAP and basic security principles
Working knowledge on IIS
Working knowledge on scanners including ISIS and TWAIN drivers
Working knowledge of IBM Datacap Taskmaster Capture client/server architecture
Working knowledge of Windows Services

In preparing for this certification, the following IBM course(s) are recommended to further improve your skills:
F1680 - IBM Datacap Taskmaster 8.1: Configuration and Implementation
F1687 - IBM Datacap Taskmaster 8.1: Configuration and Implementation (ILO)
F1760 - IBM Datacap Taskmaster Capture: Implementation and Configuration
F1767 - IBM Datacap Taskmaster Capture: Implementation and Configuration (ILO)
F1769 - IBM Datacap Taskmaster Capture: Implementation and Configuration (SPVC)
F1870 - IBM Datacap Taskmaster 8.1: Administration
F1877 - IBM Datacap Taskmaster 8.1: Administration (ILO)
F1879 - IBM Datacap Taskmaster 8.1: Administration (SPVC)
 

---

QUESTION: 1
What tool would a Deployment Professional use to configure Rulerunner Enterprise (aka Quattro) background tasks?

A. Datacap Studio
B.RuIerur1r1er Manager
C. Taskmaster Server Manager
D. Taskmaster Application Manager

Answer: B

---

QUESTION: 2
What is the Taskmaster Server?

A. a Server that client applications use to create tasks.
B. one of many Datacap applications that access the admin and engine databases.
C. a Windows service which controls authentication, database access, and batch processing.
D. a Windows service which controls authentication, database access, and the creation of tasks.

Answer: C

---

QUESTION: 3
Which operating system does Datacap support?

A. AIX
B. iOS
C. Linux
D. Microsoft Windows

Answer: D

---

QUESTION: 4
Which steps are needed to configure a Datacap application to use Oracle or MSSQL?

A. During installation, populate DB server name and account information, test sample application
B. Run DB definition scripts, populate the databases, configure an application to use the database, verify DB
connection
C. Install using default settings. Once installed, use Taskmaster Server Manager to point Datacap to DB server. Use
Application Wizard to copy
applications to DB server
D. Ensure the database server is installed. Enter the database server name and credentials when prompted by the
installation wizard. Test sample application when install completes.

Answer: B

---

QUESTION: 5
What is the Taskmaster Web?

A. never runs batch verification rules.
B. has the sole responsibility to run batch verification rules.
C. supports browser-based Taskmaster clients including the ability to perform ISIS scanning.
D. supports browser-based Taskmaster clients, and does not require any additional downloads.

Answer: D

 

Click here to view complete Q&A of C2070-585 exam
Certkingdom Review

Best IBM C2070-585 Certification, IBM C2070-585 Training at certkingdom.com

100-105 ICND1 Interconnecting Cisco Networking Devices Part 1

Exam Number 100-105 ICND1
Associated Certifications CCENT, CCNA Routing & Switching, CCDA, CCNA Security, CCNA Wireless
Duration 90 Minutes (45-55 questions)
Available Languages English, Japanese
Register Pearson VUE
Exam Policies Read current policies and requirements
Exam Tutorial Review type of exam questions

This exam tests a candidate's knowledge and skills related to network fundamentals, LAN switching technologies, routing technologies, infrastructure services, and infrastructure maintenance.

Exam Description
The Interconnecting Cisco Networking Devices Part 1 (ICND1) exam (100-105) is a 90-minute, 45–55 question assessment that is associated with the Cisco Certified Entry Network Technician (CCENT) certification and is a tangible first step in achieving other associate-level certifications. This exam tests a candidate's knowledge and skills related to network fundamentals, LAN switching technologies, routing technologies, infrastructure services, and infrastructure maintenance.

The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

Subscribe to Cisco Learning Network Premium and access the most comprehensive e-learning training, resources and tools you’ll need to prepare for your CCENT, CCNA and CCNP Routing and Switching certifications.

1.0 Network Fundamentals 20%

1.1 Compare and contrast OSI and TCP/IP models

1.2 Compare and contrast TCP and UDP protocols

1.3 Describe the impact of infrastructure components in an enterprise network

1.3.a Firewalls
1.3.b Access points
1.3.c Wireless controllers

1.4 Compare and contrast collapsed core and three-tier architectures

1.5 Compare and contrast network topologies

1.5.a Star
1.5.b Mesh
1.5.c Hybrid

1.6 Select the appropriate cabling type based on implementation requirements

1.7 Apply troubleshooting methodologies to resolve problems

1.7.a Perform fault isolation and document
1.7.b Resolve or escalate
1.7.c Verify and monitor resolution

1.8 Configure, verify, and troubleshoot IPv4 addressing and subnetting

1.9 Compare and contrast IPv4 address types

1.9.a Unicast
1.9.b Broadcast
1.9.c Multicast

1.10 Describe the need for private IPv4 addressing

1.11 Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment

1.12 Configure, verify, and troubleshoot IPv6 addressing

1.13 Configure and verify IPv6 Stateless Address Auto Configuration

1.14 Compare and contrast IPv6 address types

1.14.a Global unicast
1.14.b Unique local
1.14.c Link local
1.14.d Multicast
1.14.e Modified EUI 64
1.14.f Autoconfiguration
1.14.g Anycast

2.0 LAN Switching Fundamentals 26%

2.1 Describe and verify switching concepts

2.1.a MAC learning and aging
2.1.b Frame switching
2.1.c Frame flooding
2.1.d MAC address table

2.2 Interpret Ethernet frame format

2.3 Troubleshoot interface and cable issues (collisions, errors, duplex, speed)

2.4 Configure, verify, and troubleshoot VLANs (normal range) spanning multiple switches

2.4.a Access ports (data and voice)
2.4.b Default VLAN

2.5 Configure, verify, and troubleshoot interswitch connectivity

2.5.a Trunk ports
2.5.b 802.1Q
2.5.c Native VLAN
2.6 Configure and verify Layer 2 protocols
2.6.a Cisco Discovery Protocol
2.6.b LLDP

2.7 Configure, verify, and troubleshoot port security

2.7.a Static
2.7.b Dynamic
2.7.c Sticky
2.7.d Max MAC addresses
2.7.e Violation actions
2.7.f Err-disable recovery

3.0 Routing Fundamentals 25%

3.1 Describe the routing concepts

3.1.a Packet handling along the path through a network
3.1.b Forwarding decision based on route lookup
3.1.c Frame rewrite

3.2 Interpret the components of routing table

3.2.a Prefix
3.2.b Network mask
3.2.c Next hop
3.2.d Routing protocol code
3.2.e Administrative distance
3.2.f Metric
3.2.g Gateway of last resort

3.3 Describe how a routing table is populated by different routing information sources

3.3.a Admin distance

3.4 Configure, verify, and troubleshoot inter-VLAN routing

3.4.a Router on a stick

3.5 Compare and contrast static routing and dynamic routing

3.6 Configure, verify, and troubleshoot IPv4 and IPv6 static routing

3.6.a Default route
3.6.b Network route
3.6.c Host route
3.6.d Floating static

3.7 Configure, verify, and troubleshoot RIPv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution)

4.0 Infrastructure Services 15%

4.1 Describe DNS lookup operation

4.2 Troubleshoot client connectivity issues involving DNS

4.3 Configure and verify DHCP on a router (excluding static reservations)

4.3.a Server
4.3.b Relay
4.3.c Client

4.3.d TFTP, DNS, and gateway options

4.4 Troubleshoot client- and router-based DHCP connectivity issues

4.5 Configure and verify NTP operating in client/server mode

4.6 Configure, verify, and troubleshoot IPv4 standard numbered and named access list for routed interfaces

4.7 Configure, verify, and troubleshoot inside source NAT

4.7.a Static
4.7.b Pool
4.7.c PAT

5.0 Infrastructure Maintenance 14%

5.1 Configure and verify device-monitoring using syslog

5.2 Configure and verify device management

5.2.a Backup and restore device configuration
5.2.b Using Cisco Discovery Protocol and LLDP for device discovery
5.2.c Licensing
5.2.d Logging
5.2.e Timezone
5.2.f Loopback

5.3 Configure and verify initial device configuration

5.4 Configure, verify, and troubleshoot basic device hardening

5.4.a Local authentication
5.4.b Secure password
5.4.c Access to device
5.4.c. [i] Source address
5.4.c. [ii] Telnet/SSH
5.4.d Login banner

5.5 Perform device maintenance

5.5.a Cisco IOS upgrades and recovery (SCP, FTP, TFTP, and MD5 verify)
5.5.b Password recovery and configuration register
5.5.c File system management

5.6 Use Cisco IOS tools to troubleshoot and resolve problems

5.6.a Ping and traceroute with extended option
5.6.b Terminal monitor
5.6.c Log events
QUESTION: No: 1
Which three statements are true about the operation of a full -dupIex Ethernet network? (Choose three.)

A. There are no collisions in full-duplex mode.
B. A dedicated switch port is required for each full-duplex node.
C. Ethernet hub ports are preconfigured for full-duplex mode.
D. In a full -dupIex environment, the host network card must check for the availability of the network media
before transmitting.
E. The host network card and the switch port must be capable of operating in full-duplex mode.

Answer: A, B, E

---

QUESTION: No: 2
Which OSI layer header contains the address of a destination host that is on another network?

A. application
B. session
C. transport
D. network
E. data link
F. physical

Answer: D

---

QUESTION: No: 3
Which layer of the TCP/IP stack combines the OSI model physical and data link layers?

A. Internet layer
B. transport layer
C. application layer
D. network access layer

Answer: D

---

QUESTION: No: 4
Which protocol uses a connection-oriented service to deliver files between end systems?

A. TFTP
B. DNS
C. FTP
D. SNMP
E. RIP

Answer: C

Click here to view complete Q&A of 100-105 exam
Certkingdom Review

Best Cisco CCNA 100-105 Certification, Cisco 100-105 Training at certkingdom.com

P2090-070 IBM Information Management Optim z/OS Technical Mastery Test v1

This proctored technical mastery test examines Optim z/OS knowledge regarding the ability to identify, manage and close sales opportunities.

The test is applicable to sales representatives who demonstrate sales and technical knowledge of the Optim z/OS product and targets the technical sales
professional who can deliver a comprehensive business solution to customers through solution identification, product differentiation, and competitive
positioning.

This technical mastery test meets one of the technical requirements for the IBM Software Value Incentive Program and counts toward your PartnerWorld membership level. It is strongly advised that the candidate complete the recommendededucation prior to attempting this technical mastery test.
Skill name: Information Management Optim z/OS Technical Professional v1 PartnerWorld skill code: 32001013

Test information
Number of questions: 40
Time allowed in minutes: 75
Required passing score: 70%
Languages: English
Proctored

Section 1 -- DATA GROWTH (25%)
Use the BROWSE utility to inspect data
Define an archive criteria
Perform a date-based archive
Perform a restore of archived data

Section 2 -- TEST DATA MANAGEMENT (27.5%)
Define an Access Definition using existing DB2 RI relationships
Define an Optim relationship
Perform an extract
Perform a creation and insert of target tables
Use COMPARE to inspect data
Use the EDIT utility against test data

Section 3 -- DATA PRIVACY SOLUTION (20%)
Create a CONVERT that uses several method for masking data
Preserve referential integrity during CONVERT
Use COMPARE to assure intended results of masking

Section 4 -- COMMON ELEMENTS (22.5%)
Understand the major components of the Optim architecture
Define relationships
Define and review traversal by Access Definition

Section 5 -- INSTALLATION, CONFIGURATION, AND SECURITY (5%)
Know the major aspects of installation and security
Know the major aspects of security

QUESTION: No:1
A generic relationship is used between pairs of tables with differing _.

A. base names
B. column names
C. attributes
D. creator IDs

Answer: D

---

QUESTION: No:2
Which of the following facilities is used to create database objects at a destination without loading data'?

A. Insert
B. Load
C. Create
D. Restore

Answer: C

---

QUESTION: No:3
What is NOT a function of the Compare component?

A. transform test data to protect privacy
B. compare archived data with current data to evaluate changes
C. identify differences between the contents of two tables
D. analyze differences in data before and after execution of an application

Answer: A

---

QUESTION: No:4
Which method is NOT a suggested way to examine data in an archive file?

A. Use Optim Browse to examine the archive file contents.
B. Write a custom program using OPTIM's Archive API.
C. Use Optim Open Data Manager (ODM)
D. Use the ISPF Browse facility to examine the contents of the archive file.

Answer: D

---

QUESTION: No:5
When including Legacy data in Optim processes, which of the following is FALSE?

A. Legacy Tables are supported not only for the Move Process but also for the Archive Process.
B. A Legacy TabIe's structure is specified by identifying a "copybook" or building the equivalent from scratch.
C. "Legacy Tables" includes support for sequential datasets, VSAM, and IMS.
D. A Legacy Table must be associated to a Data Source.

Answer: A

Click here to view complete Q&A of P2090-070 exam
Certkingdom Review

Best HPE P2090-070 Certification, HPE P2090-070 Training at certkingdom.com

C2090-600 IBM DB2 11.1 DBA for LUW

Test information:
Number of questions: 60
Time allowed in minutes: 90
Required passing score: 64%
Languages: English

DB2 Server Management (15%)
Configure and manage DB2 servers, instances, and databases
Create and manage database storage paths
Exploit autonomic features
Explain the functionality of WLM
Describe the capabilities of Data Server Manager

Physical Design (22%)
Implement BLU Acceleration
Describe DB2 pureScale enhancements
Create, manage, and alter DB2 objects
Demonstrate the proper use of compression
Describe the SQL compatibility available
Describe the partitioning capabilities available

Business Rules Implementation (10%)
Create and modify table constraints
Enforce constraint checking with the SET INTEGRITY command
Create and use triggers

Monitoring DB2 Activity (12%)
Demonstrate the proper use of monitoring tools
Use the DB2 Problem Determination tool (db2pd)
Describe the capabilities of dsmtop
Capture and analyze EXPLAIN information

Utilities (13%)
Demonstrate the proper use of DB2's data movement utilities
Demonstrate the proper use of REORG, REORGCHK, REBIND, RUNSTATS, FLUSH PACKAGE CACHE, and ADMIN_CMD
Perform an INPLACE table REORG
Demonstrate the proper use of db2look and db2move

High Availability (13%)
Perform database-level and table space level backup and recovery operations
Configure and manage HADR
Implement a DB2 pureScale environment

Security (15%)
Explain the use of LDAP authentication
Create and use trusted contexts
Restrict access to sensitive data
Explain how to encrypt data in transit and data at rest

Configure and use the Audit facility

IBM Certified Database Administrator - DB2 11.1 for Linux, UNIX, and Windows
Job Role Description / Target Audience

This intermediate level certification is intended for those who understand the DB2 11.1 technology and have the skills required in the day-to-day administration of DB2 instances and databases. To attain the certification, candidates must pass two tests. To gain additional knowledge and skills, and prepare for the tests based on the job roles and test objectives, click on the link to the test below and refer to the Test Preparation tab,

---

QUESTION: No: 1
Assuming no database connections exist, which of the following will dynamically change the LOCKLIST
database configuration parameter for a database named SAMPLE to AUTOMATIC?

A. UPDATE DB CFG FOR sample USING LOOCKLIST AUTOMATIC IMMEDIATE
B. UPDATE DB CFG FOR sample USING LOOCKLIST 8192 AUTOMATIC IMMEDIATE
C. CONNECT TO sample; UPDATE DB CFG FOR sample USINGLOCKLIST AUTOMATIC
IMMEDIATE;CONNECT RESET;
D. ATTACH TO db2instI;UPDATE DB CFG FOR sample USING LOCKLIST AUTOMATIC;DETACH;

Answer: C

---

QUESTION: No: 2
Which two tasks must be done to read data directly from IBM Softlayer Object Storage and insert it into a
DB2 database? (Choose two.)

A. Catalog a storage access alias in the DB2 database
B. Create an FTP account on IBM Softlayer Object Storage
C. Use the DB2REMOTE parameter of the LOAD command
D. Establish a remote connection to IBM Softlayer Object Storage using DB2 Connect
E. Create a local disk alias at the database server operating system level that points to IBM Softlayer
Object Storage

Answer: A,C

---

QUESTION: No: 3
Which of the following statements about compression for BLU MPP tables is TRUE?

A. Compression must be explicitly enabled for BLU MPP tables
B. Compression requires decompression to evaluate partition joins
C. Unique compression dictionaries are generated for each partition
D. Each table has a single compression dictionary that getsreplicated across all partitions

Answer: D

---

QUESTION: No: 4
A production database has the following daily midnight backup schedule which includes all table spaces.
The database incurs the same volume of daily actMty (inserts, updates, and deletes).
Sunday - Delta
Monday - Incremental
Tuesday - Delta
Wednesday - Delta
Thursday- Incremental
Friday - Delta
Saturday- Full
Which day would you expect a RECOVER DATABASE following that day's backup to take the longest
time to complete?

A. Friday
B. Monday
C. Saturday
D. Wednesday

Answer: A

Click here to view complete Q&A of C2090-600 exam
Certkingdom Review

Best IBM C2090-600 Certification, IBM C2090-600 Training at certkingdom.com